18
PRO SERIES TECHNICAL SPECIFICATIONS
SYSTEM SPECIFICATIONS
intercom line impedance 350 ohms (1 kHz),2.2 Kohms (DC)
intercom line audio level nom. -18 dBu,max. +4 dBu
dynamic range 80 dB
call send signal 2.8 mA
call receive signal threshold +2.4 V DC
supply voltage +30 V DC (12 V to 32 V)
power interrupt time for 0.1 sec
mic mute
POWER SUPPLY
mains voltage range 100 - 240 V AC 50/60Hz (auto select)
DC output voltage +30 V +/-2% DC
max.output current PS 279/289/4379:
2,5 A continuous / 3,5 A peak
PS 680:4 A continuous / 6 A peak
PS 6379:5 A continuous / 7 A peak
circuit breaker delay time 0.2 sec
automatic reset time 3.0 sec
MIC. PREAMP
gooseneck microphone type noise canceling electret
headset mic.impedance 200 ohms
gain 40 dB - 60 dB (adjustable internally)
presence filter +6 dB at 5 kHz
frequency response 200 Hz - 15 kHz (-3 dB)
V electret mic +9 V DC
limiter range (gooseneck mic) 30 dB
HEADPHONES DRIVER AMP
max.load 100 ohms
max.output level normal 17 V rms
binaural 2x 8,5 V rms
max.output power normal 1 W rms (at 200 ohms)
binaural 2x 0.2 W rms (at 400 ohms)
SPEAKER DRIVER AMP (PS 130/230/430/630)
speaker impedance 25 ohms
max.output power 2.9 W rms
SIDETONE
rejection 0 - 30 dB adjustable
BUZZER
max.SPL 100 dBA
PROGRAM INPUT (PS 630/ 279 / 289 / 4379 / 6379)
input impedance 47 Kohms
nominal input level -12 dBu to +6 dBu
max.input level +16 dBu
AUX INPUT (PS 279/289/680/4379/6379)
input impedance 11 Kohms
gain 0 dB (line level)
nominal input level -20 dBu to +10 dBu (line level)
max.input level +21 dBu (line level)
DIRECT MIC OUTPUT (PS 630)
output impedance 50 ohms (balanced)
nominal output level +6 dBu
max.output level +24 dBu
DC input (PS 279 / 289 / 4379 / 6379)
12 - 28 V
Note:0 dBu defined as 775 mV rms into open circuit.
In keeping with our policy of continued improvement,ASL reserve the
right to alter specifications without further notice.This range of products
was designed,developed and produced by ASL Intercom BV,Utrecht,
The Netherlands.
PRO SERIES
Komentáře k této Příručce